Metric sizes within 0.35 in of 31 in
| Size | Diameter | Width |
|---|---|---|
| 255/80R15 | 31.06 in | 10.0 in |
| 315/65R15 | 31.12 in | 12.4 in |
| 335/60R15 | 30.83 in | 13.2 in |
| 275/75R15 | 31.24 in | 10.8 in |
| 295/70R15 | 31.26 in | 11.6 in |
| 235/85R15 | 30.73 in | 9.3 in |
| 285/70R15 | 30.71 in | 11.2 in |
| 345/60R15 | 31.30 in | 13.6 in |
| 255/75R16 | 31.06 in | 10.0 in |
| 345/55R16 | 30.94 in | 13.6 in |
| 295/65R16 | 31.10 in | 11.6 in |
| 315/60R16 | 30.88 in | 12.4 in |
| 275/70R16 | 31.16 in | 10.8 in |
| 235/80R16 | 30.80 in | 9.3 in |
| 355/50R17 | 30.98 in | 14.0 in |
| 255/70R17 | 31.06 in | 10.0 in |
| 295/60R17 | 30.94 in | 11.6 in |
| 275/65R17 | 31.07 in | 10.8 in |
| 325/55R17 | 31.07 in | 12.8 in |
| 235/75R17 | 30.88 in | 9.3 in |
| 275/60R18 | 30.99 in | 10.8 in |
| 235/70R18 | 30.95 in | 9.3 in |
| 255/65R18 | 31.05 in | 10.0 in |
| 335/50R18 | 31.19 in | 13.2 in |
Calculated from the size code; not every size is made, and real tires measure a little differently. Check availability.
Diameter = width × aspect × 2 ÷ 2,540 + wheel diameter
True speed from a 31.6 in original tire
| New tire | Diameter change | Reads 60 | Reads 70 |
|---|---|---|---|
| 30 in | −5.06% | 57.0 | 66.5 |
| 31 in | −1.90% | 58.9 | 68.7 |
| 32 in | +1.27% | 60.8 | 70.9 |
| 33 in | +4.43% | 62.7 | 73.1 |
| 34 in | +7.59% | 64.6 | 75.3 |
| 35 in | +10.76% | 66.5 | 77.5 |
| 37 in | +17.09% | 70.3 | 82.0 |
| 40 in | +26.58% | 75.9 | 88.6 |
Actual speed = indicated × new diameter ÷ old diameter. 31.6 in is a 265/70R17.
Diameter on a 17 in wheel by width and aspect ratio
| Aspect | 255 mm | 265 mm | 275 mm | 285 mm | 295 mm | 315 mm |
|---|---|---|---|---|---|---|
| 60 | 29.05 | 29.52 | 29.99 | 30.46 | 30.94 | 31.88 |
| 65 | 30.05 | 30.56 | 31.07 | 31.59 | 32.10 | 33.12 |
| 70 | 31.06 | 31.61 | 32.16 | 32.71 | 33.26 | 34.36 |
| 75 | 32.06 | 32.65 | 33.24 | 33.83 | 34.42 | 35.60 |
Overall diameter in inches.
Worked example
A 265/70R17 is 265 × 0.70 = 185.5 mm of sidewall, or 7.30 inches. Two sidewalls plus the 17-inch wheel make 31.6 inches. Moving to a 285/70R17 (32.7 inches) is 3.5% taller: at an indicated 60 mph you are doing 62.1 mph, and engine RPM at a given speed drops 3.4%. To bring the gearing back from 3.73, the ratio would need to be 3.73 × 32.7 ÷ 31.6 = 3.86.
Before you change tire size
- Speedometer and odometer read low by the same percentage the diameter grows.
- Gearing gets taller: engine RPM at a given speed drops by the same percentage, which costs acceleration and towing pull.
- Clearance at full lock and full suspension compression; a wider tire also needs the right wheel width and offset.
- Load and speed ratings must still meet the vehicle's placard.
Common sizes worked out
| Size | Diameter | Width | Revs per mile |
|---|---|---|---|
| 245/75R16 | 30.47 in | 9.6 in | 662 |
| 265/70R17 | 31.61 in | 10.4 in | 638 |
| 275/65R18 | 32.07 in | 10.8 in | 629 |
| 285/70R17 | 32.71 in | 11.2 in | 617 |
| 295/70R18 | 34.26 in | 11.6 in | 589 |
| 315/70R17 | 34.36 in | 12.4 in | 587 |
Calculated from the size code.
Reading a metric tire size
In 285/70R17, 285 is the section width in millimeters, 70 is the sidewall height as a percentage of that width, R means radial and 17 is the wheel diameter in inches. The sidewall is 285 × 0.70 = 199.5 mm (7.85 in); add two sidewalls to the 17-inch wheel and the tire stands about 32.7 inches tall.
Common questions
How do I find my tire's diameter?
Use the size on the sidewall: section width × aspect ratio × 2 ÷ 2,540, plus the wheel diameter. Or measure from the ground to the top of the tread with the vehicle unloaded.
Sources
- https://gearstar.com/rpm-calculator/